Introduction Of Automatic Screw Feeding Machine

The automatic screw feeder provides enterprises with the most trouble-free way to increase the degree of automation of production.

1.This machine can be used with a variety of screws, such as (1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, 5.0) common screws;

2.Can also be applied to special screws, especially suitable for 1:1 short screws, with gasket screws;

3.Adjust the track, replace the distribution tray and the distribution plate to adapt to different screws;

4.Different parameters can be set through the digital display panel, the adjustment is convenient, and the parameters are intuitive;

5.The turntable material, the position accuracy of the material is ± 0.02, with the card material reversal function;

6.With automatic counting function, through the digital display panel, the number of counts at a glance;

7.When taking the material, just put the batch head into the guide nozzle, slide down the guide groove, drop into the nut flower groove, and then pull the screw forward;

8.Small size, does not take up space, easy to operate, even if you can also learn to operate immediately, no card screws, high production efficiency.