How To Maintain The Air Leg Rock Drill

Air leg rock drills are a type of hand-held pneumatic tools. Pneumatic leg rock drills are widely used in industries such as mining and construction. But how long does the gas leg rock drill want to use? Here's how to maintain the air leg rock drill.

When the air leg rock drill is equipped with a drill pick, the clearance between the pick tail and the brazing body should be checked, and then hold the handle and slowly apply pressure to the rock drilling direction to make the pick drill work normally. When the gas leg rock drill is working normally, lubricate every 2-3 hours and inject it from the connecting pipe. When the air leg rock drill hits the soft ore layer, do not insert the drill pick into the ore layer to prevent air strike. If the gas leg rock drill is stuck in the rock joint, do not shake the gas pick violently to prevent damage to the connected parts. During use, the air leg rock drill is disassembled at least twice a week. The diesel oil is cleaned, dried, and coated with lubricating oil, and then assembled and tested. Air leg rock drills, such as pneumatic picks, have been discontinued for a long time and should be disassembled for cleaning, oil seals, and warehouse storage.

The air leg rock drill is suitable for drilling vertical downward blast holes. The air leg rock drill is widely used. The gas leg rock drill is suitable for drilling horizontal and inclined blastholes on medium-hard and hard rocks. Proper maintenance of the air leg rock drill can extend its life.