2018年7月17日星期二

Mining Electric Scraper Winch/ Scraper Winch

Click below office website can knew more retails about product
http://www.zmgkmachinery.com/productinfo1395
sales@chinacoalintl.com
+86-537-2350961
chinacoal011

Introduction of Mining Electric Scraper Winch/ Scraper Winch

The Mining Electric Scraper Winch is mainly used to metal, chemical, construction and the mine etc, and the underground working, such as the transportation etc. Meanwhile, the Mining Electric Scraper Winch is just suitable to the parallel transportation on ground, or the slopes within 500;

Configuration of Mining Electric Scraper Winch

The main components of the Mining Electric Scraper Winch: Deceleration device, main roll, Vice reel, control devices, wire guiding device and motor. These parts were installed inside and outside the shell, the shell is a good steel parts, both to protect the supporting role, but also to bear all the load. It is connected on the basis of two slide bolt.
Binoculars winch a master reel (mounted on the right, ie, close to the motor side), a secondary reel (mounted on the left).
A master reel (mounted in the middle) in the three-drum winch, two vice reel (mounted on the left and right), three drum winch can be mounted two main reel (mounted on the right and middle), a vice volume cylinder (mounted on the left), each roll corresponding control device and a wire rope guide.

Parameter of Mining Electric Scraper Winch/ Scraper Winch

Name: Scraper winch
Parameter
Unit
Working pressure
0.69-1.0
MPa
Traction
8
kN
Max rope speed
32
m/min
Air motor
Rated power
7.5
kW

Rotating speed
1200
rpm
Drum
Diameter
205
mm

Length
150
mm

Wheel flange diameter
350
mm
Wire-rope diameter
9.3
mm
Rope capacity
45
m
External dimension
L × W × H
920× 675× 475
mm
Working condition
Temperature
-10 +60
° C

Humidity
100%


Wind speed & wave height
6 / 2
level/M
Weight
360
kg

Pictures of Mining Electric Scraper Winch/ Scraper Winch




没有评论:

发表评论