Click below office website can knew more retails about product
http://www.zmgkmachinery.com/productinfo1325
sales@chinacoalintl.com
+86-537-2350961
chinacoal011
http://www.zmgkmachinery.com/productinfo1325
sales@chinacoalintl.com
+86-537-2350961
chinacoal011
Introduction of GW Series Angle Bending Machine
1.GW Series Angle Bending Machine adopt thicken top plate and high rigidity disk of iron for durable quality.
2.International standard cooper motor with ultra-high hardness accessory and fender.
3.Steel wire bender equipped with stop switch device when machine is fault can stop the power immediately.
4.Advanced design, reliable quality compact structure and stable performance
5.Closed transmission box with low noise equipped with high speed national standard motor.
2.International standard cooper motor with ultra-high hardness accessory and fender.
3.Steel wire bender equipped with stop switch device when machine is fault can stop the power immediately.
4.Advanced design, reliable quality compact structure and stable performance
5.Closed transmission box with low noise equipped with high speed national standard motor.
Feature of GW Series Angle Bending Machine
1. Adopt 10mm thicken top plate and high rigidity disk of iron, more durable.
2. Equipped with international standard copper motor.
3. Equipped with ultra-high hardness accessory and adjustable fender.
4. Equipped with stop switch, the machine can stop immediately,ensure the safety of the workers.
5. Adopt 16mm thick top plate,high rigidity disk,adjustable stylobate,the bending angle of more efficient.
6. Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate.
7. Pin-type positioning disk,it can adjust angle from 0-360 degree, more easy and convenient.
2. Equipped with international standard copper motor.
3. Equipped with ultra-high hardness accessory and adjustable fender.
4. Equipped with stop switch, the machine can stop immediately,ensure the safety of the workers.
5. Adopt 16mm thick top plate,high rigidity disk,adjustable stylobate,the bending angle of more efficient.
6. Equipped with international standard copper wire brake motor, narrowing inertance when the machine stops and bending angle is more accurate.
7. Pin-type positioning disk,it can adjust angle from 0-360 degree, more easy and convenient.
Parameter of GW Series Angle Bending Machine
Model
|
GW40
|
GW50
|
1. Bending round steel diameter
|
6-40mm
|
6-50mm
|
2.Grade thread screw steel diameter
|
6-32mm
|
6-42mm
|
3. Working plate diameter spec
|
320mm
|
320mm
|
4. Main shaft speed
|
8-15r/min
|
8-15r/min
|
5. Motor spec
|
3KW/380V
|
4KW/380V
|
6. Motor speed
|
1440t/min
|
1440t/min
|
7. Dimension
|
750× 700× 710mm
|
1060× 850× 730mm
|
8. Net weight/Gross weight
|
240kgs/260kgs
|
360kgs/380kgs
|
9. packing size
|
790× 790× 880mm
|
1100× 900× 900mm
|
没有评论:
发表评论