2018年5月7日星期一

MQT130 Underground Coal Mine Roof Jumbolter

Click below office website can knew more retails about product
http://www.chinacoalglobal.com/productinfo1457
sales@chinacoalintl.com
+86-537-2350961
chinacoal011

Introduction of MQT130 Underground Coal Mine Roof Jumbolter

MQT130 Underground Coal Mine Roof Jumbolter not only can be used for drilling roof bolt hole, but also drilling anchor hole. Also can mix and install the resin cartridge anchor rod and anchor rope, without any other equipment, can be tighten the bolt and nut suitably at once, achieve initial anchor pre-stressing force requirements.

Main Characteristics of MQT130 Underground Coal Mine Roof Jumbolter

1. MQT130 Underground Coal Mine Roof Jumbolter has small volume, light weight, simple operation, convenient maintenance of gear type pneumatic motor, running stability, high reliability of new glass fiber reinforced plastic pneumatic design, safety explosion-proof longer service life.
2. Rock hardness f10 is mainly used in coal mine coal lane, rock bolt and anchor cable supporting drilling, and stirring and install the resin anchor rod, anchor rope, for with damping nut bolt, anchor drilling machine can be directly to tighten the nut when mixing, realize the bolt mixing, a complete installation, and meet the requirements of initial prestressing force anchor.

Parameter of MQT130 Underground Coal Mine Roof Jumbolter

Parameter
Unit
MQT120
MQT130
MQT110
Stress range
Mpa
0.4-0.63
0.4-0.63
0.4-0.63
Rated pressure
Mpa
0.5
0.5
0.5
Rated torque
n.m
120
130
110
Rated speed
r/min
≥200
≥180
≥230
Maximum output power
KW
≥2.6
≥3.0
≥2.4
Maximum load torque
n.m
≥220
≥260
≥180
starting torque
n.m
≥180
≥230
≥170
Load gas consumption
m³/min
≤4.2
≤4.4
≤3.8
Maximum speed of revolution
r/min
500
460
620
Weight
Kg
52
54
48

Pictures of MQT130 Underground Coal Mine Roof Jumbolter




没有评论:

发表评论