Product Introduction
1. The XYC-3 truck-mounted water well drilling rig adopts the Faw Jiefang truck chassis which is mounted with the important components of the machine such as the drive system, winch, mud pump, etc. Those components are arranged with reasonable and compact layout, allowing for handy operation.
2. The main body of the product is configured with the position shifting device which can help the main body achieve forward and backward movement to facilitate the operation at the wellhead.
3. Both the main and auxiliary winches take usage of hydraulic drive. They are mounted on the main body of the truck-mounted water well drilling rig with compact structure and reasonable operation. The product can meet the requirements of wireline coring drilling engineering completely.
Application Range
The product is suitable for irrigation and water conservancy, geological prospecting, ground source heat pump, road, bridge, building foundation geological survey, etc.
2. The main body of the product is configured with the position shifting device which can help the main body achieve forward and backward movement to facilitate the operation at the wellhead.
3. Both the main and auxiliary winches take usage of hydraulic drive. They are mounted on the main body of the truck-mounted water well drilling rig with compact structure and reasonable operation. The product can meet the requirements of wireline coring drilling engineering completely.
Application Range
The product is suitable for irrigation and water conservancy, geological prospecting, ground source heat pump, road, bridge, building foundation geological survey, etc.
Main Parameter
Unity Machine Parameter
|
Mud Pump
| ||||
Drilling Depth
|
600m
|
Horizontal Triplex BW-250 Mud Pump
| |||
Drilling Hole Diameter
|
300-75mm
|
Displacement
|
250L/min
| ||
Open Hole Diameter
|
300mm
|
Work Pressure
|
7Mpa
| ||
End Hole Diameter
|
75mm
|
Water inlet caliber
|
75mm
| ||
Drilling Rod
|
Φ60mm
|
Water to exit caliber
|
50mm
| ||
Drilling Angle
|
90-65
| ||||
Rotary Spindle
|
Gear Oil Pump
| ||||
Spindle Forward Speed
|
30-1050r/min
|
Duplex Gear Oil Pump
|
CBF-F63/25
| ||
Spindle Reverse Speed
|
29-137r/min
|
Front Displacement
|
63mL/r 20Mpa
| ||
Spindle Stroke
|
560mm
|
Behind Displacement
|
25mL/r 20Mpa
| ||
Spindle inner diameter
|
96mm
| ||||
Spindle lifting capacity
|
6000Kg
| ||||
Main Winch(drive hydraulic system)
|
Drilling Rig Power
| ||||
Single line lifting speed
|
0-45m/min
|
Diesel Engine
|
R4105ZD 76HP
| ||
Tightrope Diameter
|
14mm
|
Electric Motor
|
Y180L-44 22KW
| ||
Hoist single line lifting capacity
|
4000kg
| ||||
Roller Diameter
|
300mm
| ||||
Roller Cubic Measure
|
35m
| ||||
Minor Winch (drive hydraulic system)
|
Truck chassis
| ||||
Roller Diameter
|
140mm
|
Model
|
CA1083K28L4A
| ||
Wire Rope Diameter
|
6mm
|
Drive form
|
4x2
| ||
Capacity Roller
|
450m
|
No.
|
CA4DF3-13E3
| ||
Displacement/power
|
4752mL/96kw
| ||||
Discharge
|
GB3847-2005
| ||||
Figure Photos
没有评论:
发表评论