sales@chinacoalintl.com
+86-537-2350961
chinacoal011
Introduction of XYL Crawler Drilling Rig for Engineering Exploration
XYL-1 (1A, 18, 1A-4, 18-1) XYL Crawler Drill Rig for Engineering Exploration is XY-1 (1A, 18, 1A-4, 18-1) drilling rig that mounted on the rubber crawlers. These drills move easily, with hydraulic feeding.
Application Range of XYL Crawler Drill Rig for Engineering Exploration
XYL Crawler Drill Rig for Engineering Exploration widely used in railway, hydropower, highway, bridge and dam etc.; Geologic core drilling and geophysical exploration. Drill the holes for small grouting and blasting.
Structural Configuration of XYL Crawler Drill Rig for Engineering Exploration
The XYL Crawler Drill Rig for Engineering Exploration includes crawler chassis, diesel engine and drilling main body; All these parts will be mounted on one frame.
The diesel engine drives drill, hydraulic oil pump and crawler chassis, the power will be transferred to drill and crawler chassis through transfer case.
Main Feature of XYL Crawler Drill Rig for Engineering Exploration
(1) Being equipped with rubber crawler make the drilling rig moving easily. At the same time, the rubber crawlers won't destroy the ground, so this kind of drilling rig will be convenient for construction in city.
(2) Being equipped with hydraulic oil pressure feeding system improves drilling efficiency and reduces labor intensity.
(3) Being equipped with ball type holding device and hexagonal Kelly, it can accomplish no-stopping working while lifting the rods and get a high drilling efficiency. Operate with convenience, security and reliability.
(4) Through the pressure indicator of bottom hole, the well condition can be observed easily.
(5) Having Hydraulic mast, convenient operation.
(6) Close levers, convenient operation.
(7)The diesel engine starts by the electromotor.
(7)The diesel engine starts by the electromotor.
Parameter of XYL Crawler Drilling Rig for Engineering Exploration
About the specifications of drilling rig, please refer to XY-1 (1A, 1 B, 1A-4, 1 B-1) drilling rig
(1) Rubber crawler chassis
| |
Theoretical velocity
|
Normal speeds 0.9, 2.0, 2.7, 3.2, 6.3, 10 Km/h
|
Reverse speed
|
2.1 Km/h
|
Rated traction power
|
6 KN
|
Grade climbing
|
20째 (upgrade and downgrade)
|
Side tilting angle
|
25째
|
Ground clearance
|
200 mm
|
Width of crawler
|
300 mm
|
Center distance of crawler
|
1610 mm
|
Ground contact length of crawler
|
1080 mm
|
Ground contact pressure of crawler
|
35 KPa
|
(2) Drive system
| |
Turning
|
single side brake and differential gear turning
|
Clutch
|
dry, two pieces, normal engaged clutch
|
Transmission case
|
integral gearbox
|
Control
|
double control levers
|
Overall length of crawler
|
4500 mm
|
Pitch of crawler
|
100 mm
|
(3) Overall dimensions (L x W x H)
|
3493 x 1170 x 2208 mm
|
(4) Drill weight
|
2580 - 2660 Kg
|
没有评论:
发表评论