What Is The Difference Between A Mortar Spraying Machine And Other Spraying Machines

   The paint film formed by the mortar spraying machine is of good quality. The coating is smooth and delicate without brush marks. The mortar sprayer presses the paint and sprays it into fine particles. Make it evenly distributed on the wall surface, so that the latex paint forms a smooth, smooth and dense coating on the wall.

   The coating efficiency of the mortar spraying machine is high. The spraying efficiency of the mortar spraying machine can be as high as 200-500 square meters per hour. It is 10-15 times that of manual brushing, saving time, cost, manpower, etc.

   The mortar spraying machine uses high-pressure spray technology to make the atomized paint particles obtain strong kinetic energy, and the paint particles are shot into the pores by this kinetic energy. Make the paint film denser, thereby enhancing the mechanical bite force between the paint film and the wall. Improve the adhesion of the entire coating and effectively extend the life of the coating.

   The mortar spraying machine can cover all corners and gaps. Since the mortar sprayer uses high-pressure spraying, the paint spray does not contain air. The paint can easily reach corners, gaps and uneven hard-to-brush areas.

Precautions When Using Stabilized Soil Mixing Station

   When you use the stabilized soil mixing station, the main power button is turned on, and the power indicator light is on. The bell reminds people to stay away from the device. Generally, people are required to be two meters away from the device before starting the machine. It is strictly forbidden to stand under the flat and inclined belt conveyor (to prevent the roller from falling and hurting during operation). Pay special attention to whether there are people on or inside the mixer and on the flat belt. If there are people, it is strictly forbidden to start the machine.

   When the material is discharged normally, observe whether the roller does not rotate, and replace or repair it in time if any abnormality is found. Press emergency stop when there is personal safety. Normally, you should not press the emergency stop, because there is material on the belt after pressing the emergency stop, which causes the mixer to slip and block the stabilized soil mixing station.

   When the stabilized soil mixing station accidentally trips, the materials in the mixer must be removed before restarting. Do not start the mixer with materials. It is strictly prohibited to use forklifts, excavators, etc. to directly load materials without feeding the silo.

Brief Introduction Of Medium Concrete Mixer

   The mixing system of the medium concrete mixer is composed of a motor, a pulley, a reduction box, a gear, a mixing device, and a mixing drum. The main motor is connected to the two-stage gear reducer through a belt, and finally drives the two horizontally arranged mixing shafts to rotate at the same speed through two pairs of open gears.

   The electrical control system needs to control the main drive motor of the medium concrete mixer, the motor of the water supply system, the motor of feeding, unloading, etc. All electrical control components are located in the distribution box. The electrical components in the distribution box are installed on an iron plate, which is safe and reliable, and easy to operate and maintain.

   The unloading system is at the bottom of the medium concrete mixer, and the unloading is carried out by manual push rod. The connection between the discharge door and the mixing drum is sealed with a sealing plate, and the position of the sealing plate can be adjusted to ensure the purpose of sealing.

Maintenance Of Medium Concrete Mixer After Use

   The medium concrete mixer consists of a mixing drum, a supporting wheel and a transmission system. In order to make it function better, we should pay attention to maintenance of medium concrete mixer after use.

   1. Before stopping the medium concrete mixer, put in a certain amount of stones and water, stir for 3-5 minutes, and then release, so that the accumulation in the cylinder can be repeated several times. After each shift, the deposits in the cylinder must be cleaned.

   2. Clean the dust and the concrete adhered to the whole machine.

   3. Place the hopper on the transportation position and hang the hook.

   4. Cut off the power supply and lock the electrical box.

   5. In the freezing season, the remaining water should be discharged from various places in the slurry water supply system.

   6. Add necessary lubricating oil to each lubrication point as appropriate.

   7. Refuel at the clutch ring, top bar, and grease nipple once per shift.

Features Of Automatic Mortar Spray Machine

   Automatic mortar spray machine, with the combined operation function of pumping, bonding and spraying; suitable for the construction of ready-mixed dry-mixed mortar with various characteristics and different purposes; modular structure, simple disassembly, convenient movement and easy use; with optional control adjustment Function to achieve different pressure, displacement and spraying speed; equipped with pressure protection device to meet the needs of remote control operation.

   Automatic mortar spray machine suitable for all kinds of plastering mortar, thermal insulation mortar, bonding mortar, fiber mortar, facing mortar, interface mortar, floor mortar, fireproof mortar, refractory mortar, self-leveling mortar, masonry mortar, reinforcement mortar, filling mortar, pouring Transportation and spraying of mortar machine.

   Automatic mortar spray machine is mainly composed of driving device, rotor assembly, air duct system, spray system, electrical device, dust removal device and other parts.

   

Safe Operation Of Mortar Spraying Machine

    In order to make the mortar spraying machine have good pumpability and prevent pipeline blockage, attention should be paid to the selection of raw materials and mixing ratio of pumping mortar. Ordinary cement is generally used, and medium sand with good gradation is used to improve the fluidity of the mortar, and it should be sieved to remove debris and big stones. Lime paste must not contain uncured sills and debris.

   The mix ratio of mortar spraying machine must not only meet the design requirements, but also meet the construction requirements of spraying ash. Because of its inspection and mastering of the first mobile phone condition data, management has changed from passive to active. In order to meet the new requirements, full-time or part-time flight management personnel must continuously increase training and learning, and update their knowledge to achieve the goal of being fully qualified for the job.

   The information feedback of mortar spraying machine has been strengthened, and repair work has been reduced. As a result of detailed records of the machine condition, a complete system of stand-alone technical files and other data have been established, processed and analyzed by the olive machine, and timely and accurately fed back to the machine management department.

   In short, the regular inspection system for mortar spraying machine is based on scientific management and instrument diagnostics. Only the correct use of mortar spraying machine can improve the completion rate and utilization rate, shorten maintenance time, reduce downtime loss, reduce failure rate, save maintenance cost, improve the overall efficiency of construction machinery, and enable construction enterprises to obtain good economic benefits.

Principle Of Cement Plaster Spraying Machine

   While you use the cement plaster spraying machine, press the hand oil pump several times to fill the transmission part with oil at first. After turning on the power, start the main motor first, and check whether the rotation direction of the rubber conveying screw is consistent with the direction indicated by the arrow. If it is inconsistent, change the power phase line. Note that this check must be performed every time the power is turned on again. Connect the delivery hose and nozzle. Add 5 liters of clean water to the hopper, start the motor to pump the clean water out to wet the hopper, pump body and delivery hose.

   After the work is completed, immediately drain the remaining material in the hopper, and pour enough clean water into the hopper to thoroughly clean the hopper, and then start the machine and pump the water out to clean the hose and nozzles until the pump is all clean water. The cleaning is over. 

   In the construction industry, spraying of mortar on external walls, spraying of external wall insulation materials, mortar brushing, spraying of refractory materials, spraying of large-area fireproof materials for buildings. During the construction of the new product, the cement plaster spraying machine was used as an agent to improve the construction efficiency of the overall project.